- Owned used and recommend by National Instruments
- Very stable - drift < 50 ppm/yr
- Excellent temperature coefficient - 2 ppm/°C
- Rugged
- Set consists of 4 resistance standards: 25 Ω, 125 Ω, 5 kΩ, 100 kΩ values as recommended by NI PXIe-408x calibration procedure
- 3/4" spacing for direct connection to the NI PXIe-4082
- Low inductance < 0.08 µH
- Accredited Calibration
- In addition to the standard values, any custom value is available. Please contact the IET sales department, for more information
- Very stable - drift < 50 ppm/yr
- Excellent temperature coefficient - 2 ppm/°C
- Rugged
- Set consists of 4 resistance standards: 25 Ω, 125 Ω, 5 kΩ, 100 kΩ values as recommended by NI PXIe-408x calibration procedure
- 3/4" spacing for direct connection to the NI PXIe-4082
- Low inductance < 0.08 µH
- Accredited Calibration
- In addition to the standard values, any custom value is available. Please contact the IET sales department, for more information
The SRX-NI-4082 is an economical high performance set of 4 resistance standards for calibration of the the NI PXIe-4082. The resistance values are per the NI PXIe-408x calibration procedure.The NI PXIe-408x calibration procedure can be found at the link below: NI PXIe-408x calibration procedure
SRX-NI-4082 Standard Resistor Set Basic Specifications
Initial Adjustment to Nominal: 0.1%Test conditions: 23°C, low power, accredited calibration traceable to SIValues: 25 Ω, 125 Ω, 5 kΩ, and 100 kΩ Stability: 20 ppm/yearTemperature coefficient: 2 ppm/°CVoltage coefficient: 0.1 ppm/VTerminals: Two gold plated, low thermal-emf banana plugs positioned on standard 3/4 inch spacing for direct connection to the DMM Maximum applied power: 0.6 WDimensions: 2.54 cm W x 5.1 cm L x 3.8 cm H; (1" x 2" x 1.5")Weight: 0.15 kg (0.1 lbs) Operating temperature range: - 55 to 70°C < 80% RH Altitude: <2000 mEnclosure: ABS thermoplastic, Flammability - UL 94-V0